Clamping System
|
Clamping force (at 90kg /cm 2 ) |
ton |
168 |
Tie bar diameter |
mm |
85¡Ñ4, 80¡Ñ2 |
Die platen size (H¡ÑV) |
mm |
700¡Ñ670 |
Between tie bars (H¡ÑV) |
mm |
445¡Ñ415 |
Max. Die stroke |
mm |
362 |
Die height |
mm |
150 ~ 500 |
Nozzle touch force |
ton |
6.9 |
Nozzle break stroke |
mm |
250 |
Injection System
|
Dia. Injection cylinder |
mm |
dia. 100 |
Max. Injection force |
ton |
8.5 |
Max. Injection stroke |
mm |
190 |
Standard plunger tip dia. |
mm |
60 |
Total net injection amount (Mg) |
gr |
600 |
Melting pot capacity (Mg) |
kg |
200 |
Nozzle position (Center lower part) |
mm |
0, -100 |
Max. Casting area |
cm 2 |
500 |
Casting pressure |
kg/cm 2 |
336 |
Ejection System
|
Ejection force |
ton |
7.5 |
Ejection stroke |
mm |
90 |
Hydraulic System
|
Casting cycles (Free) |
n/h |
700 |
Working pressure |
kg/cm 2 |
105 |
Clamp end accumulator (Bladder) |
L/pcs |
35¡Ñ1 |
Injection end accumulator (Piston) |
L/pcs |
30¡Ñ2 |
Oil tank capacity |
L |
600 |
Electric Unit |
3 Phase induction motor |
kw |
18.5 |
220/110VAC transformer |
amp |
5 |
Machine Size and Weight
|
Machine weight |
ton |
9 |
Overall dimensions (L¡ÑW¡ÑH) |
m |
4.9¡Ñ1.7¡Ñ2.32 |